| Drip irrigation means supplying water in controlled accurate quantities straight to the root or around it, at the same time with fertigation and/or chemical treatment. Water is distributed evenly and slowly, drop by drop, at the rate and frequency adapted to plant needs. Water evaporation is strictly compensated. Drip irrigation can be used on almost any soil type, on flat or irregular surface land. |
|
Advantages of using AZUD technology:
|
- 30-70% less water consumption and almost double crops;- Operation at low flow rate and pressures, highly efficient even water distribution, controlled at every nozzle outlet;
- Maintenance of wetness in root area at maximum retention capacity of the soil;
- Plants maturation is accelerated;
- Minimized soil erosion, minimum water, fertilizer/nutrients loss;
- Maintenance of a dry land sector between rows, allowing permanent access to plots;
- Avoidance of plant diseases as water is not in direct contact with plants;
- Low operation costs;
- Adaptability to various specific conditions; |
|
|
 |
|
AZUD PRO
|
Drip lines with thin walls and flat droppers, without pressurecompensation.
Recommended for the irrigation of the intensive crops, tree plantations and greenhouses.
Diameters: 16 mm and 20 mm.
Wall thickness: 0.75 mm, 0.9 mm, 1 mm.
Flows (1 bar): 1L, 1.6L, 2.2L, 4L. |
|
|
 |
|
AZUDRIP COMPACT
|
Drip lines with cylindrical drippers that can have one or fouroutputs.Recommended for the irrigation of the intensive crops, tree plantations, seed beds and green houses.
Diameters: 16 mm and 20 mm.
Wall thickness: 0.9 mm, 1 mm, 1.2 mm.
Flows (1 bar): 1.6L, 2.2L, 3.4L, 4L. |
|
|
 |
|
AZUD PC SYSTEM
|
Drip lines with cylindrical drippers and pressure compensation. Ensures a constant flow, irrespective of the topography of the land. Recommended for the irrigation of the surfaces with irregular topographies, long-row plantations, orchards, vineyards, etc.
Diameters: 16 mm and 20 mm.
Wall thickness: 0.9 mm, 1 mm, 1.2 mm.
Flows (1 bar): 1.6L, 2.2L, 3.4L, 4L. |
|
|
|
|
|
AZUD LINE
|
Drip lines with thin walls and flat drippers without pressurecompensation.Recommended for the irrigation of the seasonal crops,greenhouses, solariums, seed beds, gardens.
Diameters: 16 mm and 22 mm.
Wall thickness: from 0,2 mm to 0,6 mm.
Flows (1 bar): 1.1L, 1.4L, 2.1L. |
|
|
 |
|
MBTECH
|
Drip lines with outer drippers and pressure compensation. Recommended for the irrigation of the areas with irregular topographies with long rows, orchards, vineyards, etc.
Flows (1 bar): 2.3L, 3.2L, 4.1L, 8.5L, 12L. |
|
|
